ETH/USD$2,438.85LIVE
BTC/USD$82,258.66LIVE
SOL/USD$105.36LIVE
XRP/USD$1.33LIVE
ADA/USD$0.23LIVE
DOT/USD$1.15LIVE
BNB/USD$729.13LIVE
ETH/USD$2,438.85LIVE
BTC/USD$82,258.66LIVE
SOL/USD$105.36LIVE
XRP/USD$1.33LIVE
ADA/USD$0.23LIVE
DOT/USD$1.15LIVE
BNB/USD$729.13LIVE
ETH/USD$2,438.85LIVE
BTC/USD$82,258.66LIVE
SOL/USD$105.36LIVE
XRP/USD$1.33LIVE
ADA/USD$0.23LIVE
DOT/USD$1.15LIVE
BNB/USD$729.13LIVE
ETH/USD$2,438.85LIVE
BTC/USD$82,258.66LIVE
SOL/USD$105.36LIVE
XRP/USD$1.33LIVE
ADA/USD$0.23LIVE
DOT/USD$1.15LIVE
BNB/USD$729.13LIVE
Skip to content
GAS

ETH Gas Tracker: Live Ethereum Gas Price

LIVE · UPDATES EVERY 60 SECONDS

Short answer

Ethereum gas is 0.066 gwei right now (standard speed), so a plain ETH transfer costs about $0.003 — below the 56-day median (0.098 gwei).

Over the last 56 days the median base fee was 0.098 gwei and 90% of blocks were under 0.600 gwei. Gas was cheapest from 7 PM to 4 AM ET and on weekends, and most expensive on weekday mornings, 9 AM–1 PM ET. See the heatmap or calculate a fee.

Live Gas Prices

Live — updates every 60s
Last updated: 12:37:25 AM · PublicNode fee history · USD: Coinbase ETH/USD updated 12:37:25 AM

Slow

0.064 GWEI
Est: 10+ minutes
Cost: $0.003

Standard

0.066 GWEI
Est: 3-5 minutes
Cost: $0.003
RECOMMENDED

Fast

0.103 GWEI
Est: < 1 minute
Cost: $0.005

Rapid

0.721 GWEI
Est: < 15 seconds
Cost: $0.04

When should I transact?

Gas is low right now — a good time to transact.

Network demand is below its recent norm, so transfers, swaps and approvals cost less than usual. Standard speed is usually enough.

Base fee 0.064 gwei is below the 56-day median (0.098 gwei). Cheapest hours lately: 7 PM–4 AM ET and weekends; priciest: weekdays 9 AM–1 PM ET (see the heatmap below).

Ethereum transaction fee calculator

Fee = gas units used × gas price (gwei) × 0.000000001 × ETH price. Pick an action to load a typical gas amount measured from real mainnet transactions, or type your own. The gas price and ETH price fill in from the live feeds above; you can overwrite either.

Estimated fee

$0.0034

0.00000139 ETH

Fixed at 21,000 gas for a plain ETH send to a wallet. This never varies.

Your wallet simulates the exact transaction and is the final word on gas used. You only pay for gas actually used, not the gas limit.

Best time to transact on Ethereum: 56-day base-fee heatmap

Across 403,456 Ethereum mainnet blocks from Aug 20 to Oct 15, 2026, the base fee was lowest from about 7 PM to 4 AM US Eastern (23:00–08:00 UTC) and on weekends, and highest on weekday mornings from 9 AM to 1 PM ET (13:00–17:00 UTC). The most expensive hour (11 AM ET) had a median about 6× the cheapest hour. Weekend blocks had a median base fee about 47% lower than weekday blocks.

Time zone:

Swipe the chart sideways to see all 24 hours.

Median Ethereum base fee in gwei by day of week and hour (ET), Aug 20 – Oct 15, 2026
ET12a1a2a3a4a5a6a7a8a9a10a11a12p1p2p3p4p5p6p7p8p9p10p11p
Mon.08.08.07.07.08.14.13.13.16.35.52.97.50.37.23.21.27.20.13.09.08.09.08.08
Tue.07.07.07.07.11.10.11.11.14.29.35.48.28.20.17.13.12.10.06.06.07.06.06.06
Wed.07.07.06.08.10.12.13.11.19.35.37.48.32.27.22.16.16.12.08.06.07.06.07.09
Thu.06.06.06.08.11.10.12.11.18.33.64.63.52.35.23.15.16.10.07.06.08.10.11.08
Fri.07.06.08.10.12.12.12.11.19.49.67.56.57.30.25.22.12.10.09.07.07.07.07.06
Sat.06.06.07.06.07.07.06.06.07.07.08.09.08.09.08.07.06.06.06.06.06.06.06.06
Sun.06.06.06.06.06.06.06.06.07.07.07.10.16.12.10.09.07.06.06.05.07.06.06.07
cheapest (0.0523 gwei) most expensive (0.973 gwei)Cell = median base fee (gwei) for that hour, Aug 20 – Oct 15, 2026.

Cheapest window

Evenings and overnight ET: 7 PM–4 AM ET (23:00–08:00 UTC) hourly medians (all days combined) sat between 0.061 and 0.070 gwei, near the 25th percentile of all blocks (0.061 gwei).

Most expensive window

Weekday late morning: 9 AM–1 PM ET (13:00–17:00 UTC) peaked at a 0.387 gwei median at 11 AM ET, with Monday 11 AM the single priciest cell.

Weekends

Saturday and Sunday medians were 0.065 gwei versus 0.123 gwei on weekdays. Saturday never had a cell above 0.09 gwei.

Hour-by-hour medians (ET) as a table
Hour (ET)Median base feevs. overall median
00:000.0661 gwei-32%
01:000.0641 gwei-34%
02:000.0666 gwei-32%
03:000.0696 gwei-29%
04:000.0854 gwei-13%
05:000.0979 gwei+0%
06:000.0984 gwei+1%
07:000.0950 gwei-3%
08:000.126 gwei+29%
09:000.238 gwei+143%
10:000.345 gwei+253%
11:000.387 gwei+296%
12:000.318 gwei+225%
13:000.211 gwei+116%
14:000.153 gwei+56%
15:000.128 gwei+31%
16:000.113 gwei+16%
17:000.0896 gwei-8%
18:000.0679 gwei-31%
19:000.0608 gwei-38%
20:000.0672 gwei-31%
21:000.0654 gwei-33%
22:000.0660 gwei-33%
23:000.0688 gwei-30%

Method: Base fee for every block from eth_feeHistory on public Ethereum RPC nodes, timestamped from block headers, grouped by day of week and hour, median per cell (US Eastern was UTC−4 for the whole window). Medians ignore short spikes: the single highest block reached 24.9 gwei on Sep 24, 2026, and 99% of blocks were under 3.3 gwei. Patterns can change when demand changes; always check the live number before you send.

What is a good gas price right now? Gwei explained

Gwei is a unit of ETH: 1 gwei = 0.000000001 ETH (10⁻⁹). Gas prices are quoted in gwei per unit of gas. Since EIP-1559, the price per gas has two parts: a base fee, set by the protocol from how full recent blocks were and burned, and a priority fee (tip) that goes to the validator. The base fee can move by at most 12.5% per block, so it changes gradually rather than jumping unpredictably.

A “good” gas price is relative, not a fixed number. The fair test is how today’s base fee compares with recent history. Here are the bands from 403,456 mainnet blocks over the last 56 days (Aug 20 – Oct 15, 2026). The cost columns use the live ETH price ($2,439) and add no tip, so the wallet’s final figure will be a little higher.

Band (56 days)Base feeETH transfer (21,000 gas)Token transfer (~46,100 gas)Uniswap swap (~133,900 gas)
Very cheap (cheapest 10% of blocks)0.0489 gwei$0.003$0.005$0.02
Cheap (cheapest 25%)0.0614 gwei$0.003$0.007$0.02
Typical (median block)0.0978 gwei$0.005$0.01$0.03
Busier (75th percentile)0.212 gwei$0.01$0.02$0.07
Busy (90th percentile)0.600 gwei$0.03$0.07$0.20

Rule of thumb: if the live base fee is at or below the “cheap” band, send now. If it is above the 90th percentile and nothing is urgent, waiting an hour or two usually brings it back down, because the base fee falls automatically whenever blocks are less than half full.

How to estimate an Ethereum transaction fee by hand

Fee in ETH = gas used × (base fee + tip) ÷ 1,000,000,000. Multiply by the ETH price for dollars. ethereum.org’s own example: 21,000 gas × (10 + 2) gwei = 252,000 gwei = 0.000252 ETH. At 0.5 gwei the same transfer is 10,500 gwei, or 0.0000105 ETH.

Typical gas used, measured from successful mainnet transactions we sampled (10,454 transactions across 60 recent blocks, Oct 15, 2026):

ActionMedian gas usedTypical range (10th–90th pct.)Transactions sampled
ETH transfer21,000fixed4,958
USDT transfer46,10041,300–63,2002,632
USDC transfer45,20040,300–62,3001,356
Other ERC-20 transfer43,80030,300–79,200842
Token approval47,20031,600–55,600444
Uniswap swap133,900117,800–173,400222

Token transfers to a wallet that has never held that token cost more, because the contract writes a new storage slot; that is why the upper end of the range is higher. Need more action types (bridging, NFT mints, staking)? Use the gas fee estimator by action.

How layer 2 networks change what you pay

Rollups such as Arbitrum, Optimism and Base execute transactions off mainnet and post compressed data back to Ethereum. Your L2 fee is the rollup’s own execution fee plus your share of that data-posting cost. Since the Dencun upgrade (13 March 2024) rollups can post data in cheaper temporary “blobs” (EIP-4844), which have their own fee market separate from mainnet gas. That cut L2 fees sharply; ethereum.org notes it was not designed to lower mainnet (L1) gas much.

  • Frequent small actions (swaps, mints, small payments) are usually cheaper on an L2 — compare live fees at l2fees.info before you choose a network.
  • Moving to and from an L2 still touches mainnet. A deposit through the official bridge is a mainnet transaction, so time it with the heatmap above. Withdrawals from optimistic rollups through their native bridges have a challenge period of about 7 days.
  • Low L1 gas narrows the gap. When mainnet base fees are a fraction of a gwei, a simple ETH transfer on mainnet can cost only cents, so moving funds to an L2 just to save gas may not be worth the bridge step.
  • Same address, different network. Your 0x address works on every EVM network, but the funds are separate. Double-check the network in your wallet before sending; our ETH address checker catches typos and address-poisoning lookalikes.

More background: Ethereum layer 2 explained and gas fees explained.

Cheap gas is not the only thing to check before you sign

  • Low fees bring out approval and drainer scams. Read what you are signing and review old allowances with our token approvals guide.
  • Nobody legitimate needs you to “pay gas” to receive funds or unlock a withdrawal — that is a classic scam script. See Scam Watch and fake exchange support scams.
  • Buying on a schedule? Gas is a fixed cost per purchase, so very small DCA buys made on mainnet lose more to fees. Model it with the ETH DCA simulator.
  • New to self-custody? Start with the Ethereum wallet guide.

Sources and data

Related Tool

Need estimated costs for a specific action?

Estimate a Uniswap swap, NFT mint, Aave deposit, or bridge using current gas data and typical gas units — 30+ action types.

Gas Estimator by Action Type

How to read the Ethereum gas tracker

What the four speed tiers mean

Each tier is the current base fee plus a priority fee (tip) taken from recent blocks: roughly the 10th, 30th, 60th and 90th percentile of tips that validators actually accepted in the last five blocks. Slow suits transactions that can wait, standard is a sensible default, and fast or rapid add a larger tip for time-sensitive actions such as closing a position or claiming a limited mint.

The USD figure on each card is the cost of a simple 21,000-gas ETH transfer at the live Coinbase ETH/USD price. Contract calls use more gas, so use the fee calculator above or the gas estimator for swaps, approvals and token transfers.

Practical ways to pay less gas

Most savings come from timing and from where you transact rather than from guessing the perfect tip.

  • Check the live number before you sign. In our 56-day sample, evenings and overnight in US Eastern time (7 PM–4 AM ET) and weekends were cheapest; weekday mornings (9 AM–1 PM ET) were the most expensive.
  • Use a layer 2 network (Arbitrum, Optimism, Base) for frequent small transactions; moving funds onto the L2 is still a mainnet transaction, so time that step.
  • Batch actions where your wallet or the app allows it instead of sending many small transactions.
  • Set a sensible max fee in your wallet so a sudden spike cannot charge more than you intended.
  • Never "speed up" a transaction through a link someone sends you; only use your own wallet interface.

Where the data comes from

Live estimates refresh about every 60 seconds from public Ethereum RPC endpoints (PublicNode, dRPC, 1RPC) that need no API key, with fallbacks if one source is slow. If every source fails the page says so rather than showing a stale number. The heatmap and percentile bands come from the base fee of every mainnet block between Aug 20 and Oct 15, 2026; we refresh them periodically. Treat any figure as a snapshot: the next block can differ.

Frequently asked questions

What is a good gas price on Ethereum right now?

Judge it against recent history rather than a fixed number. Over Aug 20 to Oct 15, 2026 the median mainnet base fee was about 0.098 gwei, a quarter of blocks were under 0.061 gwei and 90% were under 0.60 gwei. If the live base fee on this page is at or below the cheap band, it is a good time to send; if it is in the top 10%, waiting an hour or two usually saves money.

When is Ethereum gas cheapest?

In our analysis of 403,456 blocks from Aug 20 to Oct 15, 2026, the base fee was lowest from about 7 PM to 4 AM US Eastern time (23:00 to 08:00 UTC) and on weekends, when the median was about 47% lower than on weekdays. It was highest on weekday mornings, 9 AM to 1 PM ET. Patterns shift with demand, so always check the live number.

How much does it cost to send ETH?

A plain ETH transfer always uses 21,000 gas. Multiply 21,000 by the gas price in gwei, divide by 1,000,000,000 to get ETH, then multiply by the ETH price. At 0.1 gwei and a $2,400 ETH price that is 0.0000021 ETH, about half a cent. The short answer box on this page does the calculation live.

How much gas does a token transfer or swap use?

In 60 recent mainnet blocks we sampled on Oct 15, 2026, USDT and USDC transfers used a median of about 45,000 to 46,000 gas (up to about 63,000 when the recipient had never held the token), token approvals about 47,000, and Uniswap router swaps about 134,000, with multi-hop swaps higher.

How do I calculate an Ethereum transaction fee?

Fee in ETH = gas used × (base fee + priority fee) in gwei ÷ 1,000,000,000. For example 21,000 gas × (10 + 2) gwei = 252,000 gwei, which is 0.000252 ETH. You only pay for gas actually used, not the gas limit you set.

What is gwei?

Gwei is a denomination of ETH equal to 0.000000001 ETH (one billionth). Gas prices are quoted in gwei per unit of gas because the numbers are easier to read than tiny fractions of an ETH.

What is the difference between the base fee and the priority fee?

The base fee is set by the protocol from how full recent blocks were, can change by at most 12.5% per block, and is burned. The priority fee, or tip, goes to the validator and is what you raise to be included sooner. Your wallet adds the two together.

Is gas cheaper on layer 2 networks?

Usually yes. Rollups such as Arbitrum, Optimism and Base bundle many transactions and post the data to Ethereum, and since the Dencun upgrade in March 2024 they can use cheaper blob space. Deposits into an L2 through the official bridge are still mainnet transactions, and when mainnet gas is very low the saving on a single transfer can be small.

Why did my transaction fail but still cost gas?

Validators did the computation before the transaction reverted, so the gas used up to that point is still charged. Common causes are slippage limits, expired quotes or setting the gas limit too low.

Related

Educational information only, not financial or tax advice. Results depend on the inputs and data sources described above; verify anything important with a primary source before acting.

Share this tool